Hiring an Interior Design Subconsultant: A Guide for Architects

An interior design subconsultant is a designer an architecture firm brings onto its own team, under its own contract, to carry the interior side of a commercial project: finishes, furniture, fixtures and equipment (FF&E), art, and the purchasing that follows. The architect keeps the client and stays the architect of record. The subconsultant takes the interior decisions off the architect’s desk, for a single day or for the length of the project. At R/terior Studio, Rydhima Brar does this work herself, for architects and firms that do not have an interior designer in house.
Why firms without an interior designer bring one in
It usually starts after the hard part. The plans are resolved, the permit set is moving, and then the client asks which chairs go in the lobby, what hangs on the long wall by reception, and whether the finish board will survive real use. Someone has to answer, and in most small and mid-sized firms that someone is a project architect.
That is an expensive afternoon. The person who should be on drawings or construction administration is comparing fabric memos and chasing lead times instead. Hiring a full-time interior designer solves it, but interior work tends to arrive in waves, and payroll does not. A subconsultant sits in between: senior interior judgment when the project needs it, and nothing on the books when it does not.
What a subconsultant can take on
The scope is yours to set. Some firms want one focused day. Others want an interior partner from schematic design through installation. These are the pieces we are asked for most. We have carried commercial interiors from design through purchasing and installation for 3CB Performance, a physical therapy clinic; Simi Valley Family Dental; and Anatta.io’s startup office.
A day of decisions
Sometimes a project does not need months of help. It needs one experienced person in the room for a day. We come in at a day rate, walk the space or the drawings with your team, and close out a stalled set of choices: the art for a lobby or corridor, a finish palette that keeps getting reopened, or a long list of furniture options cut down to a short list the client can say yes to. You leave the day with the selections made and the boards or schedule to show for it.
FF&E selection and specification
We select and specify furniture, decorative lighting, textiles, window treatments and accessories, with commercial durability in mind: abrasion and cleanability for upholstery, finishes that hold up to daily traffic, and pieces that can actually be reordered. For upholstered seating in California we ask manufacturers for documentation against TB 117-2013, the state’s flammability standard, which covers public spaces as well as homes. We specify inside the clearances and criteria your team sets, and we flag anything that needs your review.
Art and object curation
Art is often the last decision and the first thing a guest or patient notices. We look at sightlines, scale and the story the client wants the space to tell, then select pieces or recommend artists and set hanging and framing standards so the program reads as one. Before founding R/terior Studio, Rydhima worked with art consultancies on art programs for hotel public spaces and guest rooms, and that discipline shapes how she approaches a wall.
Procurement through installation
Specifying is half the job. We also handle FF&E budgeting, purchasing, expediting, receiving coordination and installation oversight, then walk the punch list with your team. Our procurement services page covers how we work with general contractors and owners, and our guide to FF&E procurement explains who is accountable when things arrive late or damaged.
A right hand on call
Between the big milestones, a lot of small interior questions pile up. Which alternate when a chair goes on backorder. Whether a substituted fabric is close enough. What to tell the client about a lead time. We can be the person your team calls for those, so the decisions keep moving and the project architect stays on architecture.
Where the line sits
A good subconsultant makes the architect’s job lighter without blurring who is responsible for what. Code, life safety, accessibility and egress stay with the architect of record, and so does anything structural. Our work is the nonstructural interior: finishes, furnishings, fixtures and art, selected within the criteria your drawings set. When a selection touches clearances or accessibility, it goes to your team for review before it goes to the client. R/terior Studio does not hold a general contractor’s license; installation runs through licensed contractors.
How the engagement is usually set up
The architect holds the contract with the client, and the interior design subconsultant contracts with the architect. The American Institute of Architects publishes standard forms for exactly this. AIA C401 is the standard agreement between an architect and a consultant, and C402 is written for consultant services that are limited in scope or do not extend into construction, which suits a day-rate session or a design-only scope. Some firms use their own consultant agreement instead. Either way, settle three things in writing before work starts: the scope, how the fee is billed, and who owns the selections and documents at the end.
The client relationship stays yours. We can present under your firm’s name or alongside it, whichever you prefer.
In-house hire, project subconsultant or a single day
| Option | Best for | How you pay | What you walk away with |
| In-house interior designer | A steady flow of interior work every month | Salary, benefits and overhead all year | Interior capacity on staff |
| Project subconsultant | A project that needs interiors from design through installation | A fee for an agreed scope, for the length of the project | Selections, specifications, purchasing and installation oversight |
| Day-rate session | A stalled decision, an art selection or a client presentation | One flat day rate, booked when you need it | Decisions made, with boards or a schedule to share |
In all three, your firm keeps the client relationship.
Common questions
Do architects hire interior designers as consultants?
Yes. On commercial projects, architects often bring interior designers onto their team, much as they bring in structural or MEP engineers. The architect manages the consultants and keeps the client relationship, and the interior designer delivers the interior scope.
Who holds the contract with the client?
The architect. The interior design subconsultant signs an agreement with the architecture firm, often based on AIA C401 or C402 or the firm’s own consultant form, and the architect decides how that fee appears on its invoice to the client.
Can I hire an interior designer for just one day?
Yes. We offer day-rate sessions for focused work such as selecting art, settling a finish palette, narrowing furniture options or preparing for a client presentation. The rate is agreed before the day is booked, and you leave with the selections made.
What is the difference between an interior designer and an FF&E consultant?
An FF&E consultant focuses on furniture, fixtures and equipment: selection, specification and often purchasing. An interior designer usually covers that plus the broader interior, such as finishes, lighting character and art. As a subconsultant we can take on either, depending on what your team already has covered.
Does the interior designer take on code or accessibility responsibility?
No. The architect of record remains responsible for code, life safety and accessibility. We select within the criteria and clearances your drawings set and send anything that touches them back to your team for review.
When should we bring an interior subconsultant in?
The earlier the better. Bringing us in during design development lets finishes and furniture shape the plan rather than squeeze into it, and leaves room for lead times. If a package has already stalled, a single focused day can still get it moving.
Can the same subconsultant handle procurement?
Yes. We handle FF&E budgeting, purchasing, expediting, receiving coordination and installation oversight, so the person who selected each piece is the person tracking it to the site.
If you are a general contractor rather than an architecture firm, our guide to working with a design subconsultant covers the contractual side, including how certified design scope counts toward participation goals.
Where to start
Send us the project, the phase it is in and where the interior decisions are getting stuck, at hello@rteriorstudio.com or through our contact page. If you would rather talk it through first, a 90-minute Design Strategy Session is the simplest way to scope it. For bid and contractor work, see our procurement services.